Microwave Data Systems MDS entraNET 2400 Especificaciones descargar pdf (Pagina 37)

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide 29

3.1.3 Accessing the Embedded Management

System

The menu-based management system provides access to view and con-

figure many unit parameters and provides you with basic diagnostic and

maintenance tools. There are several ways to gain access to the

entraNET Management System.

• Terminal-Emulator—Use a terminal emulator program on

your PC, such as HyperTerminal, connected directly to the

MDS entraNET 900

COM1 port via a serial cable.

• Telnet—Text-based access to the Management System through

the Ethernet interface (AP only).

• Web Browser—Connect to the entraNET units using a Web

browser on a local PC connected directly to the transceiver’s

LAN port or associated network (AP only).

When you use Telnet or a Web browser to communicate with the trans-

ceiver, you will need to know the unit’s IP address, the User Name, and

Password in advance.

NOTE: It may be necessary to change your IP access to the local area

network to match the one used by the MDS entraNET 900.

(Defaults: IP–192.168.1.1, Netmask–255.255.0.0) You can

identify or verify the transceiver’s IP address using a

terminal-emulator to communicate with the transceiver

through the COM1 Port and then viewing the Starting Informa-

tion Screen.

If you are accessing the entraNET MS via a browser connected to the

LAN port, you will see a sign-in screen similar to the one shown in

Figure 3-5.

Invisible place holder

Figure 3-5. Sign-in Screen when using a Web Browser

NOTE: Passwords are case sensitive. Do not use punctuation mark

characters. You may use up to eight characters.

The following are detailed procedures for connecting to the embedded

Management System.

admin

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 147 148

Sin comentarios

Microwave Data Systems MDS entraNET 2400 Especificaciones Pagina 37