Microwave Data Systems MDS entraNET 2400 Especificaciones descargar pdf (Pagina 75)

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide 67

• Firmware Filename—Name of file to be received from the

TFTP server.

[Any 40-character alphanumeric string] Verify that this corre-

sponds to the TFTP directory location. May require sub-direc-

tory, for example:

entranet/bkrfto-1_0_0.gpk.

• TFTP Timeout—Time in seconds the TFTP server will wait

for a packet ACK (acknowledgment) from the transceiver

before suspending the file transfer. [10 to 120 seconds; 10]

• Retrieve File—Initiate the file transfer from the TFTP

server. Placed into inactive firmware position in the trans-

ceiver’s non-volatile memory [Y, N]

• Image Verify—Initiate the verification of the integrity of

firmware file held in unit.

• Image Copy—Initiate the copying of the active firmware into

the inactive image.

• Reboot Device—Initiate rebooting the transceiver. This

will interrupt data traffic through this unit, and the network if

performed on an Access Point. Intended to be used to toggle

between firmware images.

NOTE: See “Upgrading the AP’S Firmware” on Page 67 for

details on setting up the TFTP server.

• Current Firmware—Shows the current firmware revision

level.

Upgrading the AP’s Firmware

From time-to-time MDS offers upgrades to the transceiver firmware.

One version of the firmware provides core software resources for all

radio models. Uploading new firmware into the unit will not alter any

privileges provided by Authorization Keys and does not require the

transceiver to be taken off-line until you want to operate the unit from

the new firmware image in the unit.

You must use the entraNET Management System for all firmware activ-

ities, including uploading from a TFTP server.

NOTE: To upgrade the Remote firmware, refer to UPGRADING

REMOTE FIRMWARE, on Page 93.

The uploads can be initiated through any of the three entraNET Manage-

ment System gateways:

• Terminal-Emulator—Use a terminal emulator program on

your PC, such as HyperTerminal, connected directly to the

transceiver’s

COM1 port via a serial cable.

• Telnet—Text-based access to the Management System through

a network connection.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 147 148

Comentarios a estos manuales

Sin comentarios

Microwave Data Systems MDS entraNET 2400 Especificaciones Pagina 75

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Microwave Data Systems MDS entraNET 2400