Microwave Data Systems MDS entraNET 2400 Especificaciones descargar pdf (Pagina 95)

MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide 87

OWNER=<owner>—Sets/displays owner information string. Owner can

program any information (as one continuous string). Allowable length

is 1–30 characters.

UPTIME= —Read Only. Displays current system uptime <YY-MM-DD

hh:mm:ss>. Allowable length is 1–11 characters.

SER=— Read Only. Sets / displays device serial number. Acceptable

value range is 1–99999999

XSNUM= —Read Only. Sets / displays Radio Board Serial Number.

Acceptable value range is 0–99999999.

DIRECT

[DEFAULT=<default>, MODE=<mode>, STATE=, TYPE=<type>, NETADDR=<ne-

taddr>, CMD=<cmd>]

Sets / displays the configuration for direct mode operation (Remote to

Remote).

Optional Arguments:

DEFAULT=<default>—Sets / displays default DIRECT mode.

OFF: Direct Mode defaults to disabled

ON: Direct Mode defaults to enabled

EXT: Direct Mode defaults to control via external signal

MODE=<mode>—Sets / displays DIRECT mode setting

OFF: Direct Mode disabled

ON: Direct Mode enabled

EXT: Direct Mode controlled via external signal

STATE=— Read Only. Display status of DIRECT mode setting.

OFF: Direct mode state: off

ON: Direct mode state: on

TYPE=<type> Read / Write. Sets / displays whether device acts as root or

node when in direct mode.

NODE: Direct type is Node

ROOT: Direct type is Root

NETADDR=<netaddr>—Sets / display Network (system) address when in

direct mode. Acceptable value range is 0–32637.

CMD=<cmd>—If set to 0, the command executes normally. If <cmd> is

set to 1, the command reports all settings in a format that may be copied

into a configuration script.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 147 148

Sin comentarios

Microwave Data Systems MDS entraNET 2400 Especificaciones Pagina 95