
MDS 05-4055A01, Rev. A MDS entraNET 900 System Guide 39
• SNMP v3 Priv Password—Privacy password stored in
flash memory. Used when the SNMP Agent is managing pass-
words locally (or initially for all cases on reboot). This is the
SNMPv3 used for privacy (DES encryption). The password
string can be between 8 and 30 alpha-numeric characters. [Man-
ager, Local; Local]
• SNMP Mode—Current state of the SNMP agent.
[Enable/Disabled, v1-only, v2-only, v3-only, v3-only, v1-v2,
v1-v2-v3; Disabled]
• Trap Version—Set version to be used with traps.
[v1 Traps, v2 Traps]
• Auth Trap Enable—Current state of the authentication
traps. [Disabled/Enabled; Disabled]
• Trap Manager (#1–#4)— Table of up to 4 locations that
traps are sent to. (Any standard IP address)
3.3.5 Bridge Configuration Menu
Invisible place holder
Figure 3-11. Bridge Configuration Menu
• Ethernet Bridging—Allows choice as to packets sent
over bridge.
• Bridge Priority—This value is used along with the MAC
address to define the bridge ID. The Bridge ID is used by the
Spanning Tree protocol to determine the root bridge in the net-
work. This value is useful for forcing a certain bridge to always
be the root.
• Bridge Hello Time—Defines how often Spanning Tree
protocol Bridge Protocol Data Units (BPDU) are sent out by the
Access Point. Each bridge in the network should have the same
hello time.
Comentarios a estos manuales