Microwave Data Systems MDS entraNET 2400 Especificaciones descargar pdf (Pagina 94)

86 MDS entraNET 900 System Guide MDS 05-4055A01, Rev. A

7E2—7 char bits, even parity, 2 stop bits

8N1—8 char bits, no parity, 1 stop bit (Default)

8N2—8 char bits, no parity, 2 stop bits

8O1—8 char bits, odd parity, 1 stop bit

8O2—8 char bits, odd parity, 2 stop bits

8E1—8 char bits, even parity, 1 stop bit

8E2—8 char bits, even parity, 2 stop bits

NOTE: Entry of data formats other than those listed above may cause

undesired operation.

BUFFER=<buffer>—Sets / display maximum buffer size of the COM port.

Acceptable value range is 1–1500.

DELAYCHARS=<delaychars>—Sets / displays minimum inter-packet gap

for the COM port. Acceptable value range is 1–256.

CONFIG

[SHOW, SAVE=]

Saves/Displays the current configuration. The output is in a format that

may be copied back into the command line in order to set the configura-

tion.

Optional Arguments:

SHOW—Displays the current configuration. This is a read-only response.

SAVE=—Saves the current configuration.

DEVICE

[COMPANY=, MODEL=, PROD=, SREV=, OWNER=<owner>, UPTIME=, SER=, XS-

NUM=, CMD=<cmd>]

This command sets / displays the device configuration. Items such as

Owner, Company, and Serial Number can be found here.

Optional Arguments:

COMPANY= —Read Only. Sets / displays company name. Allowable

length is 1–20 characters.

MODEL=— Read Only. Sets / displays unit model number. Allowable

length is 1–20 characters.

PROD= —Read Only. Sets / displays product name. Allowable length: is

1–20 characters.

SREV= —Read Only. Sets / displays software revision ID. Allowable

length is 1–15 characters.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 147 148

Sin comentarios

Microwave Data Systems MDS entraNET 2400 Especificaciones Pagina 94